Ground Reinforcement Grids

We get a number of questions regarding our best selling, SuDS compliant ground reinforcement grids.

Take a look and see if your question is featured below.

Yes, the grids can be cut with any saw of choice but we recommend using a hacksaw or jigsaw for ease.

We recommend anything between 10mm and 20mm gravel for the optimum fill.

Typically, you'll need 20kg/sqm for the gravel to sit flush with the top of the grids or 30kg/sqm or more discrete finish where you can't see the grids.

Easily.

Our grids are manufactured and tested to take weights far in excess of a motorhome. We have tested up to 50 tonnes and even have these installed outside our warehouse where we receive articulated lorries everyday.

Our grids are manufactured and are Sustainable Drainage System (SUDS) compliant.

Subscribe